@mythriwaterproofing
Mythri Waterproofing
Mythri Waterproofing
Trusted. Tested. Proven.

Chemical Coating in Hyderabad

Chemical waterproofing coatings are a versatile, seamless option for concrete surfaces that need a durable water-repellent layer — whether that’s a terrace that will stay exposed, or a base layer under tiles. Applied in two directional coats, the acrylic polymer coating cures into a tough, monolithic membrane with no seams for water to find a way through.

Chemical Coating in Hyderabad
Materials Used

Dr. Fixit Roofseal, Fosroc Brushbond, acrylic polymer coatings

Common Causes We See in Hyderabad

  • Exposed concrete surfaces with no existing waterproofing layer
  • Surfaces needing a durable base coat before tile or floor finishing
  • Older coatings that have worn thin from UV exposure and foot traffic
  • Areas prone to minor surface cracking that need a flexible, seamless seal
  • Terraces or utility areas where a standalone coating (without a membrane) is the practical choice

Our Process

  1. 1 Surface cleaning and defect repair
  2. 2 Primer coat for adhesion
  3. 3 First chemical coating layer application
  4. 4 Second coat after curing (opposite direction)
  5. 5 Final inspection and water test

Frequently Asked Questions

How is chemical coating different from membrane waterproofing?

A chemical coating is a liquid-applied, seamless system that cures directly onto the surface, while a membrane is typically a pre-formed sheet or thicker system. Coatings are often quicker to apply and better suited to smaller or irregularly shaped areas.

Can this be used as a standalone treatment without tiling over it?

Yes, on exposed terraces and utility areas the coating itself, with a UV-protective top coat, can be the final finished surface without any tiling needed.

Why is the second coat applied in the opposite direction?

Applying the second coat perpendicular to the first eliminates any thin spots or missed patches from the first coat, giving full, even coverage across the surface.

How soon can the surface be walked on after coating?

Light foot traffic is usually fine after 24–48 hours, but we recommend avoiding water contact or heavy use until the full cure period (as specified by the material) has passed.

Get a Free Site Inspection

Within Hyderabad — no obligations, honest assessment.

Call Now WhatsApp