@mythriwaterproofing
Mythri Waterproofing
Mythri Waterproofing
Trusted. Tested. Proven.

Pressure Grouting in Hyderabad

Some leaks can’t be fixed with a surface coating alone — when water is actively flowing through a crack, void, or joint under pressure, you need to seal it from the inside out. Pressure grouting injects a cementitious or polyurethane grout directly into the crack under controlled pressure, where it expands and seals the water pathway permanently, rather than just capping it on the surface.

Pressure Grouting in Hyderabad
Materials Used

Polyurethane injection resins, Fosroc Nitofill, cementitious grout mixes

Common Causes We See in Hyderabad

  • Active running leaks through structural cracks in walls, slabs, or foundations
  • Voids or honeycombing in concrete formed during the original pour
  • Construction joints that were never properly sealed and are now leaking
  • Cracks in underground structures under constant hydrostatic pressure
  • Failed surface-level waterproofing where the leak has become an active flow, not just seepage

Our Process

  1. 1 Identify crack lines and injection points
  2. 2 Drill injection holes at regular intervals
  3. 3 Insert packers and flush with water
  4. 4 Inject grout or resin under controlled pressure
  5. 5 Seal injection points and inspect for completeness

Frequently Asked Questions

When is pressure grouting needed instead of surface coating?

When there’s an active, running leak rather than general dampness or seepage — surface coatings can’t hold back water under pressure, but injected grout seals the pathway from within the crack itself.

Is pressure grouting a permanent fix?

Yes, once the grout cures inside the crack or void, it forms a permanent seal that moves with the structure far better than a surface patch would.

Does this work on foundation and basement cracks specifically?

Yes, this is one of the most effective methods for basement and foundation cracks under constant groundwater pressure, since surface treatments alone often fail against that pressure.

Is the structure weakened by drilling injection holes?

No — the holes are small and strategically placed, and are fully sealed after grouting. The technique is standard practice for structural crack repair.

Get a Free Site Inspection

Within Hyderabad — no obligations, honest assessment.

Call Now WhatsApp